You are here: / / XYZ THERMAL-ZWIE-08E

XYZ THERMAL ZWIE 08E

High Performance Thermal Paste

Max Cooling. Max Performance.

Thermal Zwie is XYZ PC GEAR’s high-performance thermal interface compound for efficient heat transfer between processors and cooling solutions. Its non-conductive formulation is designed for safe application, stable performance and demanding PC, gaming and electronics environments.

Blended with premium thermal fillers, it achieves 12.8 ±0.5 W/m·K thermal conductivity to dissipate heat from CPUs and GPUs. Maintaining stable performance across -50°C to 250°C, it handles sustained heavy loads and overclocking. Its low high-temperature weight loss slows paste drying and long-term thermal decay. The smooth paste can be thinly spread with the included spatula to eliminate air gaps. This non-conductive mix reduces short-circuit hazards during installation.

• High Thermal Conductivity For Efficient Heat Transfer
• Helps Reduce Component Operating Temperatures
• Non-Conductive Formulation For Safer Application
• Low Weight Loss For Long-Lasting Stability
• Suitable For CPU, GPU And Other Cooling Applications
• Gray Compound; Supplied In 2 g And 4 g Syringes

VIEW SPECIFICATIONS FIND RETAILER

Thermal Conductivity

 

This XYZ thermal paste delivers high thermal conductivity of 12.8±0.5 W/m·K, efficiently transferring heat from CPUs, GPUs and power components to heat sinks.

Non-conductive

Non-conductive formulation greatly reduces short-circuit risk for safer application.

Steps 1

Clean the CPU surface of dust and debris.
Apply thermal paste at the center of the CPU.

Steps 2

Spread paste using the included spatula.
Achieve a paper-thin, even coating.

Spread evenly and avoid air bubbles.
Do not apply an overly thick layer.

WHAT’S INCLUDED IN THE BOX

XYZ Thermal Paste Syringe
Application Spatula for even spreading
Nylon Cleaning Brush
Thermal Paste Cleanser Wipe
Usage Method Manual

TWO WEIGHT OPTIONS AVAILABLE

Choose between 2g and 4g syringes to match your PC build needs.
• THERMAL ZWIE 2g: Ideal for single CPU/GPU installation, compact & portable
• THERMAL ZWIE 4g: Suitable for multiple builds or large heat spreader applications

Technical Specifications

XYZ THERMAL ZWIE 08E


Package Weight: 2 g, 4 g
Color: Gray
Thermal Conductivity: 12.8 ± 0.5 W/m·K
Density @25 °C: 2.5 ± 0.1 g/cm³
Cone Penetration: 260 ± 20 (0.1 mm)
Weight Loss @150 °C, 24 h: < 0.5 %
Electrical Conductivity: Non-conductive
Operating Temperature Range: -50 ~ 250 °C
Dielectric Strength: 800 ± 200 V
Minimum BLT (Bond Line Thickness): 40 μm

TYPICAL APPLICATIONS
Gaming PCs and workstations, CPUs, GPUs, Gaming consoles, Servers, Power electronics, LED modules, Routers and networking equipment, AV electronics, Other components requiring thermal interface material

APPLICATION GUIDANCE
Clean the contact surfaces before use. Apply an appropriate amount of Thermal Zwie to create a thin, uniform interface layer between the heat source and cooler. Avoid excessive material. Follow the hardware manufacturer’s installation requirements.

POSITIONING
Designed for gamers. Built for performance.
Brand: XYZ
Product: Thermal Zwie Thermal Paste

DISCLAIMER
Technical data shown are based on the product information supplied for XYZ Thermal Zwie and may represent typical laboratory values. Actual performance can vary with application method, mounting pressure, surface condition, hardware and operating environment. The user is responsible for determining suitability for the intended application.


Available Colors:
2 g
SKU | X-Thermal Zwie-08E-2G
EAN | 6978262013028

4 g
SKU | X-Thermal Zwie-08E-4G
EAN | 6978262013035

Package Contents

– Thermal Paste Syringe ×1
– Spatula ×1
– Cleaning Brush ×1
– Grease Cleanser Wipe ×1
– Usage Method Manual ×1

Downloads
Resources

All product-related materials are available in our dedicated Resource Center.
Here you can access manuals, specification sheets, media assets, installation guides, demo videos, software downloads, and more.

View All Resources

XYZ AIRONE 60 MESH ATX BLACK 6FANS